Cloning and characterization of the promoters of the key genes CPT, SRPP and REF involved in Periploca sepium rubber biosynthesis / 生物工程学报

Hevea brasiliensis is the main source of natural rubber. Restricted by its tropical climate conditions, the planting area in China is limited, resulted in a low self-sufficiency. Periploca sepium which can produce natural rubber is a potential substitute plant. cis-prenyltransferase (CPT), small rubber particle protein (SRPP) and rubber elongation factor (REF) are key enzymes involved in the biosynthesis of cis-1, 4-polyisoprene, the main component of natural rubber. In this study, we cloned the promoter sequences of CPT, SRPP and REF through chromosome walking strategy. The spatial expression patterns of the three promoters were analyzed using GUS (β-glucuronidase) as a reporter gene driven by the promoters through Agrobacterium-mediated genetic transformation. The results showed that GUS driven by CPT, SRPP or REF promoter was expressed in leaves and stems, especially in the leaf vein and vascular bundle. The GUS activity in stems was higher than that in leaf. This study provided a basis for analyzing the biosynthesis mechanism of natural rubber and breeding new varieties of high yield natural rubber.

Locust bean gum hydrogels are bioadhesive and improve indole-3-carbinol cutaneous permeation: influence of the polysaccharide concentration

Abstract The locust bean gum (LBG) is a polysaccharide with thickening, stabilizing and gelling properties and it has been used in the preparation of pharmaceutical formulations. Hydrogels (HGs) are obtained from natural or synthetic materials that present interesting properties for skin application. This study aimed to develop HGs from LBG using indole-3-carbinol (I3C) as an asset model for cutaneous application. HGs were prepared by dispersing LBG (2%, 3% and 4% w/v) directly in cold water. The formulations showed content close to 0.5 mg/g (HPLC) and pH ranging from 7.25 to 7.41 (potentiometry). The spreadability factor (parallel plate method) was inversely proportional to LBG concentration. The rheological evaluation (rotational viscometer) demonstrated a non-Newtonian pseudoplastic flow behavior (Ostwald De Weale model), which is interesting for cutaneous application. The HET-CAM evaluation showed the non-irritating characteristic of the formulations. The bioadhesive potential demonstrated bioadhesion in a concentration-dependent manner. Permeation in human skin using Franz cells showed that the highest LBG concentration improved the skin distribution profile with greater I3C amounts in the viable skin layers. The present study demonstrated the feasibility of preparing HGs with LBG and the formulation with the highest polymer concentration was the most promising to transport active ingredients through the skin.

Atmospheric evaporative demand and water deficit on the ecophysiology of Rubber seedlings

The search for genetic materials resistant to adverse weather conditions has been a major focus in studies on species of economic interest. The objective of the present study was to assess the growth and photosynthesis of rubber seedlings clones under two conditions of atmospheric evaporative demand, characterized by fluctuations in temperature (TEMP) and vapor pressure deficit (VPD), associated to two water regimens. Hevea brasiliensis Muell. Arg (RRIM 600 and FX 3864) clones were assessed in two microclimates, at low (TEMP 21.2 ºC and VPD 0.29 Kpa) and high (TEMP 26.9 ºC and VPD 1.49 Kpa) atmospheric evaporative demand, under two water regimens: water deficit and well-watered. Water deficit 50% water availability was sufficient to reduce the net CO2 assimilation rate, leaf area and total chlorophyll of the clones studied that impacted growth in both microclimates. The effects of water deficit on growth and net carbon assimilation rate were intensified under high atmospheric evaporative demand. However, when comparing the two clones studied, RRIM 600 showed greater growth and photosynthesis without water restriction. The FX 3864 clone, despite the high CO2 assimilation values under high atmospheric demand and without water restriction, showed a reduced growth. The results of this study form an important basis for the selection of genotypes with the potential to develop in adverse climatic conditions. In this sense, the RRIM 600 genotype is recommended as a promising material that would best adapt under adverse climatic conditions.

In vitro skin retention and drug permeation study of Tongluo-Qutong rubber plaster by UPLC/UV/MS/MS

Abstract Tongluo-Qutong rubber plaster (TQRP), a typical Chinese patent medicine that contains 13 different herbal remedies, is widely used in clinical practice for the treatment of cervical spondylosis and osteoarthritis. However, due to a lack of in vitro transdermal studies, the active ingredients of TQRP have not been fully elucidated. This presents a huge obstacle for quality evaluation, pharmacokinetic studies and clinical safety assessment of TQRP. In this work, a UPLC/UV/MS/MS method was established and validated to evaluate five analytes in TQRP. The validation demonstrated linearity (r > 0.99), specificity (no co-eluting peaks at the retention times of the analytes), and precision (RSD < 15%) within acceptable parameters. A skin permeation study was performed to determine the concentrations of drugs delivered to the dermis. The 24-hour cumulative permeation of ferulic acid, aleo-emodin, emodin and piperine were 303.68, 709.31, 671.06 and 25561.01 ng/cm2, respectively. According to the fitting data of the TQRP active components, skin permeation was mainly due to a combination of passive diffusion and drug release after matrix erosion

Alternaria yunnanensis sp. nov., a New Alternaria Species Causing Foliage Spot of Rubber Tree in China

A new species of Alternaria causing leaf spots on the rubber tree (Hevea brasiliensis) in Yunnan, China, was isolated, examined, and illustrated. Morphologically, it belongs to the section Porri of Alternaria, which produces relatively large conidia and a simple or branched, filamentous long beak. It is, however, characterized by conidiophores gradually enlarging near the apex into a clavate conidiogenous cell and long ellipsoid to obclavate, smooth-walled conidia with a long filamentous beak. Molecular phylogenetic analyses based on ITS rDNA, GAPDH, and TEF1-alpha sequences demonstrate that the phytopathogen falls in the clade of the section Porri, being most closely related to A. sidae, A. sennae, A. deseriticola, A. cyamopsidis, A. rostellata, A. nitrimali, A. crassa, and A. thunbergiae.

Role of a Micronized Purified Flavonoid Fraction as an Adjuvant Treatment to Rubber Band Ligation for the Treatment of Patients With Hemorrhoidal Disease: A Longitudinal Cohort Study

PURPOSE: Nonsurgical treatment of hemorrhoidal disease (HD) includes medical and instrumental techniques. We aimed to compare the efficacy of the most frequently used nonsurgical strategies, either alone or in combination, applied in an ambulatory setting.METHODS: Patients who received nonsurgical treatment for HD by proctology appointment at the Gastroenterology Department of Braga Hospital were evaluated. Isolated rubber band ligation (RBL) and a combination of RBL with a micronized purified flavonoid fraction (MPFF) were the 2 most frequently used strategies. Symptoms of HD (bleeding, pruritus, pain at rest, pain at defecation and prolapse) were assessed at days 0, 7, and 28 by using a severity grading scale (0 to 4/5). A Global Symptom score was constructed to assess the overall severity and compare the overall improvements of the HD symptoms between the 2 most frequently used strategies.RESULTS: Nineteen patients underwent the combined treatment (RBL + MPFF group) and 25 the RBL treatment (RBL group). A comparison of the 2 treatment groups showed significant improvements in the combined treatment group in terms of bleeding at days 7 (P = 0.001) and 28 (P = 0.002) and in the pruritus intensity during the first week (P < 0.001). A trend toward clinical benefit was also verified in the combined treatment group for all other HD symptoms (pain at rest, pain at defecation and prolapse).CONCLUSION: A combined treatment approach with MPFF and RBL significantly reduced the intensity of bleeding during the first month and the pruritus during the first week.

The Effects of Biofilm Care on Subgingival Bacterial Motility and Halitosis / 치위생과학회지

BACKGROUND: Oral diseases are caused by various systemic and local factors, the most closely related being the biofilm. However, the challenges involved in removing an established biofilm necessitate professional care for its removal. This study aimed to evaluate and compare the effects of professional self and professional biofilm care in healthy patients to prevent the development of periodontal diseases. METHODS: Thirty-seven patients who visited the dental clinic between September 2018 and February 2019 were included in this study. Self-biofilm care was performed by routine tooth brushing and professional biofilm care was provided using the toothpick method (TPM) or the oral prophylaxis (OP) method using a rubber cup. Subgingival bacterial motility and halitosis (levels of hydrogen sulfide, H₂2S; methyl mercaptan, CH₃SH; and di-methyl sulfide, (CH₃)₂S) were measured before, immediately after, and 5 hours after the preventive treatment in the three groups. Repeated measures analysis of variance test was performed to determine significant differences among the groups. RESULTS: TPM was effective immediately after the prevention treatment, whereas OP was more effective after 5 hours (proximal surfaces, F=16.353, p<0.001; smooth surfaces, F=66.575, p<0.001). The three components responsible for halitosis were effectively reduced by professional biofilm care immediately after the preventive treatment; however, self-biofilm care was more effective after 5 hours (H₂S, F=3.564, p=0.011; CH₃SH, F=6.657, p<0.001; (CH₃)₂S, F=21.135, p<0.001). CONCLUSION: To prevent oral diseases, it is critical to monitor the biofilm. The dental hygienist should check the oral hygiene status and the ability of the patient to administer oral care. Professional biofilm care should be provided by assessing and treating each surface of the tooth. We hope to strengthen our professional in biofilm care through continuous clinical research.

In-line Filtration in Parenteral Nutrition

Metabolic abnormalities and catheter-related infections are common complications of parenteral nutrition (PN). Particulate contamination is a catheter-related complication can occur when administering PN: mixing the electrolytes, trace elements, vitamins into the PN, or puncturing a rubber stopper at the PN formulation. In addition, the aggregation of the components of the PN solution by a drug incompatibility reaction could be related to particulate contamination. PN contaminated with precipitates, insoluble particles, and bacteria was reported as the cause of the death of a patient. The Food and Drug Administration recommended that the filters be used during PN administration. In-line filters can retain the bacteria and insoluble particles in PN solutions, and prevent their infusion into the patient. Therefore, in-line filters are recommended to prevent catheter-related complications that can occur during PN infusion. A 0.2µ filter for lipid-free PN and a 1.2µ filter for lipid-containing PN solutions can be used. On the other hand, when a filter is applied, the infusion rate can decrease and the economic burden will increase for patients requiring long-term PN. In addition, small particles, such as viruses, polymers, and proteins cannot be filtered out completely. In conclusion, in-line filers are recommended to prevent catheter-related complications that can occur during PN administration, but there are no international standardized guidelines. Therefore, standardized guidelines will be needed based on evidence accompanied by clinical trials. In addition, in-line filter applications should be considered in the clinical field depending on the patient's condition.

Occupational Risk Factors for Prostate Cancer: A Meta-analysis

Prostate cancer is the second most common cancer in men worldwide. There are many occupational factors that have been suggested to cause prostate cancer. Our aim was to evaluate the evidence for causality by a literature review of occupational factors. We searched literature in Medline and SCOPUS from 1966 to June 30, 2015 to identify occupational risk factors for prostate cancer. The following risk factors were selected: farmers/agricultural workers, pesticides – whole group, and separately organophosphate and organochlorine pesticides, carbamates and triazines, cadmium, chromium, cutting fluids, acrylonitrile, rubber manufacturing, whole body vibration, shift work, flight personnel, ionizing radiation, and occupational physical activity. For each factor a literature search was performed and presented as meta-analysis of relative risk and heterogeneity (Q and I² index). A total of 168 original studies met the inclusion criteria with 90,688 prostate cancer cases. Significantly increased risks were observed for the following occupational exposures: pesticides (metaRR = 1.15, 95% confidence interval [CI] = 1.01–1.32; I² = 84%), and specifically group of organochlorine pesticides (meta relative risk [metaRR] = 1.08, 95% CI = 1.03–1.14; I² = 0%), chromium (metaRR = 1.19, 95% CI = 1.07–1.34; I² = 31%), shift work (metaRR = 1.25, 95% CI = 1.05–1.49; I² = 78%) and pilots (metaRR = 1.41, 95% CI = 1.02–1.94; I² = 63%) and occupational physical activity in cohort studies (metaRR = 0.87, 95% CI = 0.81–0.94; I² = 0%). The literature review supports a causal association for a few of the previously suggested factors.

The Effect of Health Promotion Program on the Frailty of Rural Elderly Women Implemented at Primary Health Care Posts / 農村醫學 地域保健

OBJECTIVE: This study was conducted to examine the effects of a health promotion program on the health condition of rural elderly women implemented at primary health care posts using Korean Frailty Index. METHODS: The research was designed a nonequivalent control group pretest-posttest setting. The participants in this study were 50 residents (intervention group: 25, control group: 25) selected from 4 villages 2 primary health care posts in J city Gyeongsangnam-do. The health promotion program was conducted at the primary health care posts twice a week for 12 weeks. This program consisted of basic exercises(Gukseondo + Theraband muscle strength training) and additional activities(including modified Theraband activity, rubber ball exercise, ball massage, nutrition class, singing class). Collected data were analyzed by descriptive statistics, paired t-test, and repeated measures ANOVA with SPSS 21.0. RESULTS: Results of the health promotion program showed that the health conditions(measured by perceived health status, frailty score, upper/lower flexibility, maximum grip strength, dynamic balance test Timed Up and Go) of the experimental group(25) all statistical significantly improved. CONCLUSION: Study findings indicate that the health promotion program implemented at primary health care posts on rural elderly women is effective and can contribute to a developed health promotion program for local residents in the future.

The clinical usefulness of closed reduction of nasal bone using only a periosteal elevator with a rubber band

BACKGROUND: Closed reduction of nasal fracture with various instrument is performed to treat nasal fracture. Depending on the type of nasal fracture and the situation in which it is being operated, the surgeon will determine the surgical tool. The objective of this study was to investigate whether a periosteal elevator (PE) was a proper device to perform closed reduction for patients with simple nasal fractures. METHODS: From March 2018 to December 2018, 50 cases of simple nasal bone fracture underwent closed reduction performed by a single surgeon. These patients were divided into two groups randomly: nasal bone reduction was performed using only PE (freer) and nasal bone reduction was performed using Walsham, Asch forcep, and Boies elevator (non-freer, non-PE). RESULTS: The paranasal sinus computed tomography was performed on patients before and after operation to carry out an accurate measurement of reduction distance at the same level. According to the results, the interaction between instruments and fracture types had a significant influence on reduction distance (p = 0.021). To be specific, reduction distance was significantly (p= 0.004) increased by 2.157 mm when PE was used to treat patients with partial displacement compared to that when non-PEs were used. CONCLUSION: Closed reduction using PE and other elevator is generally an effective treatment for nasal fracture. In partial-displacement type of simple nasal fracture, closed reduction using PE can have considerable success in comparison with using classic instruments.

Physical characteristics of ceramic/glass-polymer based CAD/CAM materials: Effect of finishing and polishing techniques

PURPOSE: The aim of this study was to compare the effect of different finishing and polishing techniques on water absorption, water solubility, and microhardness of ceramic or glass-polymer based computer-aided design and computer-aided manufacturing (CAD/CAM) materials following thermocycling. MATERIALS AND METHODS: 150 disc-shaped specimens were prepared from three different hybrid materials and divided into five subgroups according to the applied surface polishing techniques. All specimens were subjected up to #4000 grit SiC paper grinding. No additional polishing has been done to the control group (Group I). Other polishing procedures were as follows: Group II: two-stage diamond impregnated polishing discs; Group III: yellow colored rubber based silicone discs; Group IV: diamond polishing paste; and Group V: Aluminum oxide polishing discs. Subsequently, 5000-cycles of thermocycling were applied. The analyses were conducted after 24 hours, 7 days, and 30 days of water immersion. Water absorption and water solubility results were analyzed by two-way ANOVA and Tukey post-hoc tests. Besides, microhardness data were compared by Kruskal-Wallis and Mann-Whitney U tests (P.05). CONCLUSION: Surface finishing and polishing procedures might negatively affect physical properties of hybrid ceramic materials. Nevertheless, immersion periods do not affect the microhardness of the materials. Final polishing by using diamond polishing paste can be recommended for all CAD/CAM materials.

Three Cases of Planned Complex Suicide / 대한법의학회지

Complex suicide refers to a type of suicide that leads to death using two or more methods. We report three cases of unique and rare examples of complex suicide, with the plan of the second and/or third method working simultaneously if the first suicidal attempt had failed. In the first case, the victim used three methods of asphyxia: hanging by a safety belt, plastic bag suffocation, and self-ligature strangulation by stretching rubber bands within the vehicle. In the second case, the victim hanged himself with electrocution by attaching electrical leads to the right side of his head. In the third case, the victim with the intention of drowning jumped 20 m above the water surface on the bridge by tying metal chains to the bridge rail and self-immolation by gasoline. Planned complex suicide involves more successful methods to commit suicide and may conversely be camouflaged as suicide in murder case.

Force decay evaluation of latex and non-latex orthodontic intraoral elastics: in vivo study

ABSTRACT Objective: This clinical study was conducted in order to evaluate force decay over time of latex and non-latex orthodontic intraoral elastics. Methods: Patients (n = 15) were evaluated using latex and non-latex elastics in the periods of : 0, 1, 3, 12 and 24 hours. The rubber bands were transferred to the testing machine (EMIC DL-500 MF), and force values were recorded after stretching the elastic to a length of 25mm. Paired t test was applied and analysis of variance (ANOVA) was used to evaluate the variation of force generated. LSD (Fisher's least significant difference) post-hoc test was thus employed. Results: As regards the initial forces (zero time), the values of force for non-latex elastic were slightly higher than for the latex elastic. In the subsequent times, the forces generated by the latex elastic showed higher values. Regarding the material degradation, at the end of 24 hours the highest percentage was observed for non-latex elastic. Conclusions: The latex elastics had a more stable behavior during the studied period, compared with non-latex.

RESUMO Objetivo: o objetivo deste estudo clínico foi avaliar e comparar o comportamento dos elásticos de látex e não látex quanto à perda de força ao longo do tempo. Método: os pacientes (n = 15) foram avaliados usando ambos os tipos de material (látex e não látex) em cada tempo: 0, 1, 3, 12 e 24 horas. Os elásticos foram transferidos para a máquina de ensaios mecânicos (EMIC DL-500 MF) e os valores de força foram registrados após a distensão dos elásticos a uma distância de 25 mm. Foi aplicado o teste t pareado, e a análise de variância (ANOVA) foi realizada para verificar a variação das forças geradas em todos os tempos estudados. Em seguida, o teste post-hoc LSD (Fisher's least significant difference) foi aplicado. Resultados: quanto às forças iniciais (tempo zero), os valores de força dos elásticos não látex foram ligeiramente maiores do que dos elásticos de látex. Nos tempos subsequentes, as forças geradas pelos elásticos de látex apresentaram valores superiores às geradas pelos elásticos não látex. Em relação à degradação do material, ao fim do período de 24 horas, o maior percentual foi observado pelos elásticos não látex. Conclusões: os elásticos de látex apresentaram comportamento mais estável durante o período de estudo, em comparação aos não látex.

Rubber gloves biodegradation by a consortium, mixed culture and pure culture isolated from soil samples

Abstract An increasing production of natural rubber (NR) products has led to major challenges in waste management. In this study, the degradation of rubber latex gloves in a mineral salt medium (MSM) using a bacterial consortium, a mixed culture of the selected bacteria and a pure culture were studied. The highest 18% weight loss of the rubber gloves were detected after incubated with the mixed culture. The increased viable cell counts over incubation time indicated that cells used rubber gloves as sole carbon source leading to the degradation of the polymer. The growth behavior of NR-degrading bacteria on the latex gloves surface was investigated using the scanning electron microscope (SEM). The occurrence of the aldehyde groups in the degradation products was observed by Fourier Transform Infrared Spectroscopy analysis. Rhodococcus pyridinivorans strain F5 gave the highest weight loss of rubber gloves among the isolated strain and posses latex clearing protein encoded by lcp gene. The mixed culture of the selected strains showed the potential in degrading rubber within 30 days and is considered to be used efficiently for rubber product degradation. This is the first report to demonstrate a strong ability to degrade rubber by Rhodococcus pyridinivorans.

Tratamiento de Clase II con Ortodoncia Sistema Damon y gomas intermaxilares en etapas tempranas de tratamiento / Treatment of Class II with Orthodontics Damon System and elastics in early stages of treatment

La técnica ortodóncica de baja fricción utiliza brackets pasivos de autoligado con una serie de arcos superelásticos que mantienen las fuerzas aplicadas sobre las piezas dentarias a nivel de la "biozona o zona fuerza óptima". La utilización de gomas intermaxilares ligeras (2 onzas o 56,68 g) en estos tratamientos, desde etapas iniciales, sobre todo en pacientes en crecimiento, permite obtener resultados muy favorables en cuanto a la resolución de la maloclusión de Clase II. Objetivo: evaluar el tratamiento de Ortodoncia de un paciente Clase II esqueletal con sobremordida, sin realizar exodoncias de premolares y utilizando elásticos intermaxilares en fases iniciales de tratamiento. Materiales y método: se presenta el caso clínico de un paciente de sexo masculino de 11 años, de Clase II esqueletal con sobremordida y apiñamiento dentario anterior superior e inferior moderado, con su diagnóstico y evaluación completos pre y post tratamiento y control y seguimiento al año. El tratamiento se realiza con brackets autoligantes (técnica de Damon). Resultados: se obtiene la corrección completa de la Clase II y la sobremordida, alcanzando los objetivos deseados de estética facial y función, en oclusión y desoclusiones, con buen desarrollo de las basales y conservación de la altura de las corticales alveolares a nivel de los caninos. Conclusión: Mediante los recursos terapéuticos disponibles en la actualidad y evaluando al niño en etapas tempranas, podremos combinar diferentes tratamientos para alcanzar los objetivos propuestos en menor tiempo y con óptimos resultados en una maloclusión de Clase II con sobremordida con biotipo mesofacial (AU)

The low friction orthodontic technique uses passive self-ligating brackets with a series of superelastic arches that maintain the forces applied to the dental pieces at the "Biozone or Optimal Force Zone". The use of inter maxillary light elastics (2 ounces or 56.68 yr.) from the initial stages in growing patients, yields very favorable results in terms of correction of Class II malocclusion. Objective: To assess the orthodontic treatment of a skeletal Class II patient with overbite, without extraction of premolars and using elastic in the early stages of treatment. Materials and methods: an 11 year old male skeletal Class II patient with overbite and moderate crowding in upper and lower anterior teeth, with complete diagnostic and evaluation before and after treatment and with annual control. For the treatment, self-ligating brackets (Damon technique) were employed. The results: Total correction of Class II condition and overbite was obtained. The desired goals of facial aesthetics and correct function were attained in occlusion and desocclusion, as well as development of the osseous basis and conservation of the canine alveolar cortical height. Conclusion: Through the employment of therapeutic resources available at present and following up the child through his developmental stages, it is possible to combine different treatments to achieve the proposed objectives in a shorter time with excellent results in mesofacial type patients with Class II malocclusion and deep overbite (AU)

El camino del caucho / The way of the rubber

Resumen Las investigaciones de Markham, primero, y luego de Spruce, llevadas a cabo en medio de múltiples peligros, internándose en selvas espesas, vadeando salvajes ríos y enfrentando nativos muchas veces hostiles, permitieron conocer el ciclo de vida del árbol del caucho para el traslado de sus semillas, su aclimatación en Asia y cultivo a nivel industrial. Indudablemente ellos fueron los héroes de esta epopeya al hacer esta investigación venturosa, pero los sabios son modestos y callados, de manera que la gloria se la llevó un empresario decidido y de pocos escrúpulos cual Wickham. En cuanto a Brasil, como buena nación latinoamericana, pecó de ingenuidad, improvisación y negligencia, dejándose arrebatar una inimaginable fortuna: el monopolio del caucho. Creemos que las múltiples aplicaciones médicas del caucho, haciendo menos dolorosos los exámenes y procedimientos, pudieran ser de interés para nuestros colegas.

Investigations first by Markham, and then by Spruce, performed in the middle of multiple risks, in the deep of dense jungle, through the wild rivers and facing up natives many times hostile, brought the knowledge of the life cycle of Hevea brasiliensis, the rubber's tree, necessary for take its seeds to Asia, its adaptation to this continent and its culture at industrial level. Undoubtedly these men were the heroes of this history, but they were wise, modest and quite people, so the glory was for an entrepreneur decided and of scare scruples, like Wickham. And Brazil, as a good Latin American nation, sinned of naivety, improvidence and negligence, allowing itself the lost of an unimaginable fortune: the monopoly of the rubber. Because the many applications of rubber in medical practice, the history of this tree may interest our colleagues.

Prediction of air inflow during central venous catheter insertion: experimental study

OBJECTIVE: This study examined the incidence and amount of air inflow during central venous catheter (CVC) insertion. METHODS: This study was an experimental study aimed at designing an apparatus to implement blood vessel and blood flow in the human body. A 1.5-m long core tube with a Teflon tube, suction rubber tube, and polyvinyl chloride tube were made. This core tube was assumed to be the blood vessel of the human body. Blood was replaced with a saline solution. The saline solution was placed higher than the core tube and flowed into the inside of the tube by gravity. The CVC was injected 15-cm deep into the core tube. The air was collected through a 3-way valve into the upper tube. The experiments were carried out by differentiating the pressure in the tube, CVC insertion step, and diameter of the end of the catheter. The experiment was repeated 10 times under the same conditions. RESULTS: The amount of air decreased with increasing pressure applied to the tube. Air was not generated when the syringe needle was injected, and the amount of air increased with increasing size of the distal end catheter. CONCLUSION: To minimize the possibility of air embolism, it is necessary to close the distal end catheter at the earliest point as soon as possible.

Comparison between rubber band and ethelon suture as a cutting seton in perianal fistula

Background: Fistula-in-ano is a commonly encountered surgical problem. There is a risk of sphincter muscle damage during fistulectomy. Seton suture is used to decrease this risk. Different types of Setons are used for this purpose

Aim: To compare 2 types of cutting Seton as regard Postoperative pain, duration until Seton cut through, post operative faecal incontinence and recurrence

Methods: This study was conducted on 80 patients in 2 groups with high perianal fistula or low perianal fistula associate with abscess cavity. Patients with inflammatory bowel disease, history of malignancy, and previous recto-anal operations were excluded from this study. One group with insertion of sterilized rubber band and silk suture was applied at the anal verge the other with Ethilon sutures. Follow up and tightening of the seton done as outpatient

Results: About half [46.25%] had low perianal fistulas with abscess cavity, and 53.75% had high perianal fistulas. Group [A] patients had 10% wound infection and group [B] had 5%, all responded to conservative management. The mean VAS score of the patients on the 1st day was [3.7 +/- 1.14], and [2.85 +/- 0.92] and on the 7th day was [1.28 +/- 0.85] and [0.88 +/- 0.88] respectively. Seton fell down after a mean time [26.35 days +/- 5.12 days] in group [A] and [27.65 days +/- 6.84 days] in group [B]. Complete healing was achieved in 77.5% of group [A] and in 60 % of group [B] after 1 month and 40 patients [100%] in both groups at 3 months. 7.5% of recurrence in group [A] and 2.5% case of recurrence in group [B]

Conclusion: Rubber band Seton is easy and cheap and provide slow and steady cutting of the sphincter maintaining continence

Relationship Between Noise-Related Risk Perception, Knowledge, and the Use of Hearing Protection Devices Among Para Rubber Wood Sawmill Workers

BACKGROUND: The understanding of the relationship between risk perception, knowledge, and protective behaviors could play a major role in occupational risk control and management. Research exploring how workers perceive, recognize, and react to risks in different occupational settings is scarce in Thailand. The aim of this study was to assess the relationship of noise-related risk perceptions and knowledge to the use of hearing protective devices (HPDs) among sawmill workers in Thailand. METHODS: Sawmill workers (n = 540) from four factories in Trang, Southern Thailand, participated in a questionnaire interview from December 2015 to January 2016. Descriptive statistics and linear regression models were used to explore the risk factors related to HPD use. Path diagram analysis was demonstrated and used to evaluate associations. RESULTS: Risk perception was significantly correlated with HPD use (p < 0.01), HPD training (p = 0.01), and the number of years of work experience (p = 0.03). Sawmill workers were likely to use HPDs based on their risk perception and HPD training. However, HPD training was inversely correlated with age and the number of years of work experience. CONCLUSION: The study highlights the importance of risk perceptions and knowledge, and these factors should be emphasized in the design and implementation of any personal safety intervention program for sawmill workers.